Zinc alloy die casting technology

Zinc alloy die-casting is more cost-effective to use aluminum alloy when the structure and die-casting process permit. Because the specific gravity of zinc alloy is about 2.6 times that of aluminum alloy, but the price is equivalent, so in terms of material cost, zinc alloy die castings are two or three times more expensive than […]

Structural and Technological Characteristics of Machining Parts of CNC Parts

1) The cavity and shape of CNC machining Japan parts  usually adopt uniform geometric types and sizes. This can reduce the tool specifications and the number of tool changes, facilitate programming, and improve production efficiency. 2) The fillet size of the inner groove determines the size of the tool diameter, so the fillet radius of […]

High-strength Steel Stamping Mold

High-strength Steel Stamping Mold Today’s high-strength steel and ultra-high-strength steel have achieved the lightweight of vehicles and improved the collision strength and safety performance of vehicles. Therefore, they have become an important development direction of automotive steel. However, as the strength of the sheet metal increases, the traditional cold stamping process is prone to cracking […]

Aluminum CNC Machining Technology

In this era when user experience is highly valued, more and more manufacturers of mobile phones, notebooks, and wearable devices are beginning to make efforts on shell materials. From the mobile phone field alone, the material of mobile phone shells is gradually transitioning from engineering plastics to metal. During the evolution of mobile phone shell […]

High-strength Steel Stamping Mold

High-strength Steel Stamping Mold Today’s high-strength steel and ultra-high-strength steel have achieved the lightweight of vehicles and improved the collision strength and safety performance of vehicles. Therefore, they have become an important development direction of automotive steel. However, as the strength of the sheet metal increases, the traditional cold stamping process is prone to cracking […]

Machining of highly difficult and complex impeller blades

Impeller blades are the core components of aero engines, steam turbines and other devices. Impeller not only refers to the wheel disk equipped with moving blades, but also refers to the general name of the wheel disk and the rotating blades installed on it. Turbine blades in aero-engines are located in the parts with the […]

Sulfuric acid Anodized Aluminum and Aluminum Alloy Black

After sulfuric acid anodization, you often see black spots and black bars on the surface of aluminum parts. Today we will talk about the causes of blackening aluminum. Please criticize and correct any deficiencies. 1. Before the part is anodized, if the surface condition is not good, the blackening phenomenon after anodization will appear, which […]

Aluminum CNC Machining Technology

In this era when user experience is highly valued, more and more manufacturers of mobile phones, notebooks, and wearable devices are beginning to make efforts on shell materials. From the mobile phone field alone, the material of mobile phone shells is gradually transitioning from engineering plastics to metal. During the evolution of mobile phone shell […]

Bakelite Parts

Bakelite is the first plastic product to be put into industrial production. The chemical name of bakelite is phenolic plastic. It has high mechanical strength, good insulation, heat resistance and corrosion resistance. The shortcomings of phenolic resins are poor mechanical properties and are not resistant to oil and chemical corrosion. In order to overcome the […]

Modified Phenolic Resin

The purpose of bakelite phenolic resin modification is mainly to improve its brittleness or other physical properties, improve its adhesion to fiber-reinforced materials and improve the molding process conditions of composite materials. Modification is generally through the following channels: ① Block phenolic hydroxyl groups. The phenolic hydroxyl groups of phenolic resins generally do not participate in […]

Phenolic Resin Physical Properties

Phenolic resin plastic(bakelite) is a hard and brittle thermosetting material. The characteristics of bakelite are non-absorbent, non-conductive, high temperature resistant and high strength. They are mostly used in electrical appliances. They are called “bakelite” because of their high insulation and plasticity like wood. Bakelite is made of powdered phenolic resin, which is mixed with sawdust, asbestos, […]

Ceramic Machining Services

Products for ceramic machining services include ceramic nozzles, ceramic dispensing valves, ceramic rods, ceramic shafts, ceramic pipe rings, ceramic sheets, tungsten steel high-speed probes, tungsten steel valve bodies, etc. Deep hole punching is a punching process when the hole diameter is equal to or less than the thickness of the material to be punched. Blanking Blanking is a […]

Free Worldwide shipping

On all orders above $50

Easy 30 days returns

30 days money back guarantee

International Warranty

Offered in the country of usage

100% Secure Checkout

PayPal / MasterCard / Visa

X