usually FittingIn, it was found that some customers could not detect the programmer, mainly in the following two situations:
1. Situation 1, as shown in the figure below:
Analyze the reasons:This is because the Use switch box from madsen electronics option is not ticked.
The correct interface should be as follows:
2. Situation 2, as shown in the figure below:
Analyze the reasons:The options in the settings are incorrect.
The correct internal option settings should be as follows:
Special statement!This article was originally created by a team of experts from China, and the source and link must be indicated for reprinting!
[banner group='banner-group']