Product workpieces: air film hole swiss machining on aero-engine blades, engine fuel nozzle punching, chemical fiber spinneret hole machining, clock and watch gears, decoration and other precision parts hole machining, **instrument parts hole machining on instruments, fine molds
Swiss micro-precision EDM machine, a special micro-discharge machining device that can process micro parts and micro holes, can achieve up to 7-axis machining, and can process complex micro-parts or micro-structures; integrate high-frequency power on the Z axis, the largest Minimize the impact of distributed capacitance on high-frequency discharge; the use of specially designed ultra-high-frequency intelligent power supply and the use of new pulse modulation and control methods, so that electrical parameters can be automatically adjusted according to the discharge state, thereby improving machining efficiency and improving machining Quality; unique micro-electrode online preparation technology, the smallest micro-electrode with a diameter of 0.005mm can be prefabricated online; high-pressure flushing technology improves the cutting effect.
*The swiss cnc machines of fine deep holes and special holes can ensure the positioning accuracy, shape accuracy and size consistency of the holes. It can process micropores as small as 10 microns (0.01mm);
*The electrode reverse copying device can prepare fine electrodes with a diameter of 5 microns and a length of 200 microns, and can perform online laser measurement of the reverse copying electrodes during the copying process, with a measurement accuracy of +/-0.15 microns;
*Thin-wall parts and fine structure machining;
*It can be used as a CNC micro-EDM milling machine, electrode loss is continuously compensated, and complex three-dimensional parts with a size of micron level can be processed with a minimum internal angle of R0.02mm;
*3 The DSCOPE device can measure the roughness and three-dimensional shape of the processed parts online.
*Double spindles can be used to improve the working efficiency of micro EDM milling.
* The taper of micro-holes can be controlled by changing the high-frequency discharge parameters, and even micro-holes with reverse cones can be processed;
* No burn on the machining surface;
*No deformation of micro-hole entrance/exit;
*The roughness of the swiss machined surface can reach Ra0.05;
*High machining efficiency;
*Good man-machine interface, intuitive and simple manual programming;
*High-speed drilling with punching induction function;
* Electrode automatic feed;
* The smallest clamping electrode diameter is 45 microns;
Link：Swiss Sarix micro-discharge machining applicationREF: Hearing Aids Supplier , Bluetooth Hearing Aids, BTE Hearing Aids
The article comes from the Internet. If there is any infringement, please contact [email protected] to delete it.